1. Open the Home app.

On every Apple device running iOS 10 or later, there is a pre-installed version of the Home app. Open the app, then choose "Add Accessory" from the top menu.



2. Manually enter or scan the device's code.

The app will then prompt you to manually enter or scan the device's barcode with your camera. The code is typically printed on the item itself or in the user manual.



3. Follow the device-specific instructions.

When the device is recognized, the Home app will prompt you to couple it with HomeKit by following the steps unique to that device. To ensure a successful pairing, carefully follow the instructions.



4. Name your device and assign it to a room.

After the pairing is complete, you can name your device and assign it to a specific room. This will help you identify and control the device more easily within the Home app.



5. Enjoy your smart home!

Congratulations, you've successfully added a device to Apple HomeKit! Repeat the process for any other compatible devices you want to add, and start enjoying the convenience and flexibility of a smart home.

1. Ensure Device Compatibility
• Check if the device is HomeKit compatible: Not all smart devices work with HomeKit. Ensure the product is labeled with the HomeKit logo or check the manufacturer’s website for compatibility.
• Check the HomeKit OR Code or Setup Code: Many devices come with a HomeKit setup code (either a QR code or a numeric code) that must be scanned or entered during the setup process.


2. Update Yur iOS or iPadOS Version
• Keey your device updated: Ensure your iPhone or iPad is running the latest version of iOS or iPadOS. Sometimes HomeKit issues are related to outdated operating system versions.
• Update the Home App: If necessary, ensure the Home app on your iPhone or iPad is also updated.


3. Ensure Bluetooth & Wi-Fi Are Enabled
• Bluetooth: HomeKit uses Bluetooth for device pairing. Ensure Bluetooth is enabled on your device by going to Settings > Bluetooth.
• Wi-Fi: Devices that require a network connection must be on the same Wi-Fi network as your iPhone or iPad. Ensure both your device and your mobile device are connected to the same 2.4 GHz network (many devices, especially older ones, don't support 5 GHz networks).


4. Check for Device Power
• Power cycle the device: Turn off the device and turn it back on. Some devices may need a power cycle to reset and be ready for pairing.
• Check for Battery: If the device is battery-powered, ensure that the batteries are charged or replaced if necessary..


5. HomeKit Setup Code
• Scan or enter the HomeKit code: For many devices, you will need to scan the HomeKit QR code or manually enter a HomeKit setup code (found on the device or its packaging) in the Home app.
• Correct code format: Double-check that you're entering or scanning the correct code for that device. If you mistyped or scanned the wrong code, the setup will fail.


6. Reset the Device and Start Over
• Factory reset the device: If the device is still not appearing in the Home app, try resetting it to factory settings. This process is usually done by holding down a reset button for a certain number of seconds (check the device’s manual).
• Re-add the device: After resetting, try pairing the device again by following the steps in the Home app.


7. Check the Home App Settings
• Remove old devices: If you’ve had trouble adding a device and have tried multiple times, there might be duplicate or old configurations. Try removing old, unused accessories from the Home app and attempt adding the device again.
• Check HomeKit Regions: HomeKit devices may only work within a specific region. Ensure that you’ve selected the correct region for your Home app in the Settings > Apple ID.


8. Reboot Your iPhone/iPad
• Restart your mobile device: A simple restart of your iPhone or iPad can often resolve connectivity issues with HomeKit and help with device pairing.


9. Ensure Your Wi-Fi is Stable
• Signal strength: Ensure your router is close enough to the device to provide a stable Wi-Fi connection. A weak Wi-Fi signal may interfere with the pairing process.
• Wi-Fi network congestion: Sometimes multiple devices on a crowded network can cause issues. Try disconnecting some devices from the network while adding the HomeKit device.


10. Check for Network Interference
• Router settings: Ensure there are no firewall or VPN issues blocking communication between your HomeKit device and the network.
• Wi-Fi range: If your HomeKit device is located far from the router, try moving it closer to the router to ensure better signal strength.


11. Reinstall the Home App
• Reinstall the app: If none of the above works, you can try uninstalling and reinstalling the Home app. This might help clear any issues with the app's data.

• Apple HomePod (second-gen)
• Apple HomePod Mini
• Apple TV 4K Wi-Fi + Ethernet (2022 version)
• Apple TV 4K (2021 version)

• Nest Hub (second-gen)
• Nest Hub Max

• Aeotec SmartThings Smart Home Hub
• Samsung SmartThings Station
• Samsung SmartThings Hub v3

1. AddtoHomeKit [Most Recommended]
2. ATH Bridge [Plug and Play Solution]

• Smart curtains
• Lights
• Switches
• Sensors

• Apple Home app
• Siri voice commands
• Tuya Smart / Smart Life app

1. Connect and power the hub (Ethernet)
2. Open Tuya app → Add Device
3. Add the hub to your account
4. Put ZigBee device in pairing mode
5. Tap Add Sub-Devices

• Wi-Fi
• Bluetooth LE

• Remote control
• Siri voice control
• Scheduling & timers
• Automation
• Smart linkage

• Control devices using Apple Home app and Siri.
• Create automations and scenes.
• Improve smart home security.
• Use Wi-Fi, Bluetooth, and ZigBee devices.
• Access devices remotely via cloud.
• Build custom setups without coding.

1. Tuya User Account: Make sure you have a Tuya user account and that your devices are linked with the Tuya App. You can check the configuration on the Tuya IoT platform.
2. Install Homebridge: If you haven't already, set up Homebridge on your Mac or PC. You can refer to our Homebridge setup guide for detailed instructions.
3. Install Tuya Plugin: After installing Homebridge, you need to install the Tuya plugin.

   To install the Tuya plugin using your terminal, run:

             
               npm install homebridge-tuya-platform
             
           

   Alternatively, you can install the Tuya plugin using the Homebridge UI:

   1. Open Homebridge in your web browser using: http://homebridge
   2. Click on the plugin in the menu bar.
   3. Search for "Homebridge Tuya" in the search field.
4. Edit the Configuration File: After installing the Tuya plugin, you need to edit the configuration file.

   Navigate to the directory:

             
               homebridge-tuya-platform/config
             
           

   Edit the config.json file to include your Tuya account details:

   • Username and Password: Use the credentials from the Tuya Smart or Smart Life app.
   • AccessId and AccessKey: Obtain these from your cloud project on the Tuya IoT platform.
   • Lang: Keep the default value.
   • Endpoint: Select the availability zone of your cloud project.
   • ProjectType: Choose the development method you selected when creating your project.
   • AppSchema: Specify the mobile app used to link your devices (Tuya Smart or Smart Life).
   • CountryCode: Select the code for the country you used when logging into the Tuya app.
5. Run the Plugin: Navigate to the homebridge-tuya-platform directory and run the plugin using:

             
               homebridge -D -U ./config/ -P ./
             
           

6. Bridge to HomeKit: Open the Home app on your Apple device. Scan the QR code from the Homebridge UI to pair with Homebridge or enter the 8-digit PIN code found in the configuration file.
7. Control Devices on HomeKit: After successful pairing, you can control your Tuya devices through the HomeKit dashboard.

1. Step 1: How Do You Set Up HOOBS?
• Plug the HOOBS hub into power
• Connect it to your router (Ethernet or Wi-Fi)
• Open the HOOBS interface in your browser
• Create your admin account


2. Step 2: How Do You Install the Tuya Plugin in HOOBS?
• Log in to the HOOBS dashboard
• Go to the Plugins section
• Search for “Tuya LAN”
• Install homebridge-tuya-lan


3. Step 3: How Do You Configure the Tuya Plugin?
• Open the installed plugin
• Copy the configuration code from the plugin page
• Paste it into the plugin settings
• Save the configuration


4. Step 4: How Do You Add Tuya Devices to Apple Home?
• Open the Apple Home app
• Tap Add Accessory
• Choose “I don’t have a code”
• Enter the 8-digit HOOBS setup code (found in dashboard)

1. Download and Flash to SD card
2. Connect to Network
3. Manage Homebridge
4. Connect to HomeKit
5. Install and configure the plugin

• Low-cost setup
• Full control over Homebridge
• Good for advanced users

• Tuya Smart or Smart Life app
• Tuya account
• Tuya developer account (iot.tuya.com)

1. How Do You Create a Tuya Cloud Project?

Go to the Tuya IoT Platform and set up your cloud project:

• Navigate to Cloud → Development → Create Cloud Project.
• Fill in the required details.
• Click Create to complete the setup.


2. How Do You Link Your Tuya App Account?

Connect your Tuya app to the cloud project:

• Go to Devices → Link Tuya App Account.
• Click Add App Account.
• Scan the QR code using the Tuya app.



Your app and cloud project are now linked.



3. How Do You Get the Device ID?

Locate your device details:

• Go to the Devices section.
• Select your device.
• Copy the Device ID.
• Select the correct data center.


4. How Do You Enable API Permissions?

Enable required services:

• Go to Cloud → My Services.
• Enable IoT Core (trial plan).


5. How Do You Extract the Tuya Local Key?

Use the API Explorer to get your Local Key:

• Go to Cloud → API Explorer.
• Open Device Management.
• Enter your Device ID.
• Submit the request.



You will now see your Local Key.



6. How Do You Add This to Homebridge?

Complete the integration:

• Open Homebridge.
• Add your device.
• Paste the Device ID and Local Key.
• Save and restart Homebridge.



Your device will now appear in Apple Home.

1. Go back to the Tuya IoT Platform page, and now go to the created cloud development project (Cloud, Development, Create Cloud Project).
2. After then, you have to fill in the details and click Create button.

1. Press the set button on the gateway until the indicator light flashes
2. Open the Tuya Smart / Smart Life app
3. Go to Add Device → Find Matter Gateway
4. Add the gateway and connect your sub-devices
5. Tap Share via Gateway
6. Generate the Matter QR code
7. Open the Apple Home app
8. Tap Add Accessory and scan the QR code

1. Ensure Tuya Devices are Set Up in the Tuya or Smart Life App
• Before integrating with HomeKit, make sure the Tuya devices are set up and working properly in the Tuya Smart or Smart Life app.
• Verify that the device is functioning normally in the Tuya app before attempting to add it to HomeKit.


2. Check HomeKit Compatibility
• Verify that your Tuya devices support HomeKit integration. Not all Tuya devices are HomeKit-compatible. Ensure that the device supports this feature (check the box or product description for the HomeKit logo or mention).
• Ensure that the HomeKit pairing code (usually a QR code or 8-digit code) is available for the device.


3. Verify HomeKit Setup Code
• When adding Tuya devices to HomeKit, ensure you're using the correct HomeKit setup code (either a QR code or a unique 8-digit code). This code is required to link your Tuya device to HomeKit.
• You can find this code in the Tuya app or printed on the device itself.


4. Check Wi-Fi Network
• Ensure your iPhone/iPad and Tuya devices are connected to the same Wi-Fi network. It's important that both devices are on the same local network, typically on the 2.4 GHz band (as many smart devices don’t support 5 GHz).
• If your Wi-Fi network is split into different bands (e.g., 2.4 GHz and 5 GHz), ensure that both your phone and Tuya devices are connected to the 2.4 GHz network.


5. Restart the Tuya Devices
• If the Tuya device is not showing up in HomeKit, try restarting it. Turn the device off and back on or reset it to factory settings.
• To reset the device, typically press and hold the reset button for about 5-10 seconds and follow the setup instructions again.


6. Update Tuya App and Device Firmware
• Ensure that the Tuya Smart or Smart Life app is up-to-date. Check the App Store for any available updates.
• Check for any firmware updates for your Tuya devices within the Tuya or Smart Life app and update them if necessary.


7. Re-add Tuya Device to HomeKit
• If the Tuya device was previously added to HomeKit but is not working anymore, you may need to remove it and add it back.
• In the Home app, find the device and remove it.
• Then, scan the HomeKit QR code again or enter the 8-digit setup code from the Tuya app.



8. Reset HomeKit Pairing
• If the HomeKit setup process fails, try resetting the HomeKit pairing for your Tuya device:
• In the Home app, remove the device.
• Go to the Tuya app and reset the device and try pairing it again with HomeKit.



9. Ensure HomeKit Hub is Working
• If you're controlling devices remotely (outside your home), make sure your HomeKit hub (Apple TV, HomePod, or iPad) is online and working.
• Your HomeKit hub should be up-to-date, powered on, and connected to the same Wi-Fi network as your Tuya devices.


10. Check Router Settings
• Make sure your router settings do not block local network traffic, especially between devices and your HomeKit hub.
• Ensure your router is not blocking communication between Tuya devices and your phone or HomeKit hub.


11. Reboot Your Router
• Sometimes, a router reboot can solve network issues that affect communication between Tuya devices and your phone. Try rebooting the router and then attempting the setup again.


12. Disable VPN or Firewall
• If you’re using a VPN or firewall, it might block local network connections, causing issues with HomeKit integration.
• Disable your VPN temporarily and check if that resolves the issue. Similarly, check your router’s firewall settings.


13. Check for Network Interference
• Smart devices can experience interference from other devices. Ensure that there’s no strong interference or excessive distance between the Tuya devices and the router.
• Consider using a Wi-Fi range extender if your devices are too far from your router.


14. Update iOS and Home App
• Make sure your iPhone or iPad is running the latest version of iOS. An outdated iOS version may cause compatibility issues with HomeKit.
• Update the Home app and ensure your iOS system is up-to-date for proper HomeKit functionality.


15. HomeKit Restrictions
• Ensure that there are no restrictions set on your device, such as parental controls or device management settings, that might block HomeKit functionality.


16. Test with a Different Device
• If the Tuya device works on one iOS device but not another, try setting it up on a different device to rule out issues with your phone or tablet.

• Connect any smart home devices to your Apple Home and Siri using AddtoHomeKit.
• Simple App-based solution
• Detailed step-by-step guides

• Nest Thermostat with HomeKit - You can control and monitor your home’s air conditioning, heating, and humidifier system from anywhere.
• Nest Protect with HomeKit - Easily get smoke notifications, carbon monoxide notifications, and motion notifications and create automation.
• Nest Camera with HomeKit - View live video from all your cameras with two-way audio on any Apple device, receive notifications when it detects motion, run iOS shortcuts or when it detects specific faces.
• Nest Secure with HomeKit - Arm and disarm your Nest security system from anywhere, Check on open windows or doors, create automation.
• Nest X Yale Lock with HomeKit - Lock and unlock your Nest X Yale Lock from anywhere and create automation to add convenience.
• Google Home Mini with HomeKit -Listen to music from any Apple device on your Google Home via AirPlay, and connect two Google Home Minis in a stereo pair.

1. Install Homebridge on Mac/PC
2. Install Nest Plugin
3. Edit the configuration file
4. Run the plugin
5. Bridge to HomeKit

1. Install Homebridge on Mac/Pc

   First, make sure you have the latest version of Homebridge installed on your computer. You can download it from the Homebridge website or through npm (Node Package Manager).

   Install homebridge using: npm install -g homebridge

   If you want to know how to add Homebridge to your device, click on how to install Homebridge guide for more info.

2. Install Nest plugin

   Next, you'll need to install the Nest plugin for Homebridge. This can be done through the npm command line:

   npm install -g homebridge-nest

3. Edit the configuration file

   Once the plugin is installed, you'll need to add it to your Homebridge configuration file. This file is usually located at ~/.homebridge/config.json. In the "accessories" section, add the following code:

   "platforms": [
   {
   "platform": "Nest",
   "options": [ "HomeAway.Disable" ],
   "access_token": "your Nest Account access token"
   }
   ],

   The "platform" field must be set to "Nest" to indicate that the integration is for Nest devices.

   There are three options for authenticating with Nest: using an access token, a Google refresh token, or Google authentication information in the form of cookies.

4. Get an access token
1. Go to https://home.nest.com in your browser and logging in.
2. Go to https://home.nest.com/session. You will see a long string that includes an access token.
3. Simply copy the value of this token and add it to your config.json file under the "platform": "Nest" entry. Do not log out of home.nest.com, as this will invalidate your credentials.
4. If you are using a Google Account, you can authenticate with it either through the refresh token method or the cookies method.
5. To use the refresh token method, you will need to run a tool provided by homebridge-nest to obtain the refresh token.
6. Add token to your config.json file.
7. To use the cookies method, you will need to add the "issueToken" and "cookies" values to the "googleAuth" object in your config.json file.
5. Run the plugin

   Now, you need to run the plugin then save the configuration file and start Homebridge. You should now see your Nest device listed in the Home app on your iOS device.

6. Bridge to HomeKit

   To control your Google smart accessories using Siri, you'll need to assign it to a room in the Home app. Simply tap on the device, then tap "Edit" and choose the room it belongs in.

1. Install the Homebridge Hub (HOOBS) on your device (such as a Raspberry Pi).

   Set up the Homebridge Hub (HOOBS) by following the instructions provided in the documentation.

2. Add the Nest Apple Home integration plugin to the Homebridge Hub (HOOBS).

   This can be done through the HOOBS web interface or by using the command line.

3. Follow the instructions provided by the Google Home Kit integration plugin to link your Nest account to the Homebridge Hub (HOOBS).
4. Once your Nest account is linked, you should see your Nest devices listed in the Homebridge Hub (HOOBS) web interface.
5. Add the Homebridge Hub (HOOBS) to the Home app on your iOS device.

   This can be done by scanning the QR code provided in the Homebridge Hub (HOOBS) web interface or by manually entering the Homebridge Hub (HOOBS) address.

6. Once the Homebridge Hub (HOOBS) is added to the Home app, you should see your Google devices listed under the "Accessories" section.
7. You can now control your Nest devices through the Home app or Siri voice commands.

1. Set up the Raspberry Pi and install the necessary software.

   This includes the Raspbian operating system and the Homebridge software, which allows the Raspberry Pi to communicate with HomeKit.

2. Install the Nest integration plugin for Homebridge.

   This plugin allows the Raspberry Pi to control your Nest thermostat and other Google devices.

3. Set up your Nest account and grant access to the Raspberry Pi.

   This can usually be done through the Nest app or website.

4. Connect the Raspberry Pi to your Nest account.
5. Add your Nest accessories to the Home app.

   Simply open the Home app, tap the "+" button, and select "Add Accessory." Then follow the prompts to add your Nest devices.

6. Control your Nest devices using Siri or the Home app.

   For example, you can say "Hey Siri, turn up the thermostat" or use the Home app to adjust the temperature manually.

• Create Automation, scenes, and groups with your Apple Accessories.
• Take advantage of Siri voice control.

• Software version 1.3 or later
• Version 3.1.108 or later of the Google Home iOS app
• Wi-Fi and Bluetooth enabled on your iPhone
• Google Matter Controller

• Google Home
• Google Home Mini
• Nest Mini
• Nest Audio
• Nest Hub (1st or 2nd generation)
• Nest Hub Max
• Nest Wifi Pro (6E)

1. Get your Matter code from Google Home.
   1. Open your Google Home App.
   2. Tap "Devices".
   3. Tap your Thermostat.
   4. Click the Setting icon.
   5. Tap "Linked Matter Apps and services".
   6. Wait for the App to generate a pairing code.
   7. Tap pairing code.
2. Add your Thermostat to Apple Home.
   1. Open the Apple Home App.
   2. Tap the Add Button.
   3. Add accessory.
   4. Scan a Setup Code.
   5. Select an Accessory to Add to Home.
3. Manage your Matter connections.
   1. Open the Google Home App.
   2. Tap "Devices".
   3. Select Thermostat.
   4. Tap the Setting icon.
   5. Tap "Linked Matter apps and services".
   6. Go to Home Services.
   7. Tap the X button to remove it.

1. Make sure that your Nest devices are properly set up and connected to the internet.
2. Check that you have enabled HomeKit on your Nest smart devices and that they are properly added to the Home app.
3. If you are having trouble controlling your Google smart devices using Siri, try resetting your HomeKit configuration by going to the "Reset Home" option in the Home app's settings.
4. Make sure that you are using the latest version of iOS and the Home app.
5. Try removing and re-adding your Nest devices to the Home app to see if that resolves any issues.
6. If you are still experiencing problems, try resetting your Nest devices by unplugging them and plugging them back in.
7. If none of these solutions work, try reaching out to Nest customer support for further assistance.

• Gemini Replaces Google Assistant

Google officially rolled out Gemini for Home, bringing more natural conversations, multi-step commands, and faster responses across Nest and Google Home devices.



• New Nest Cameras & Doorbell Launched

Google released new 2K Nest Cam Indoor, Nest Cam Outdoor, and a redesigned Nest Doorbell with better HDR, low-light performance, and AI-powered motion detection.



• Google Home App Fully Redesigned

The app is now cleaner, faster, and works as a single hub for all Nest devices.No more separate apps.



• New Google Home Speaker Announced

A new 360° audio smart speaker optimized for Gemini, acting as the central smart home controller for Google ecosystems.



• Nest Aware (Google Home Premium)

Under this premium tier of Nest Aware Google rebranded its subscription service and shifted advanced AI features like video summaries and alerts.

1. Install Homebridge.
2. Install Tapo Homebridge Plugin.
3. Update your Homebridge configuration file.

1. Connect HOOBS to your network.
2. Set up a HOOBS account.
3. Install the Tapo plugin.
4. Connect Tapo to Apple Home.

1. Scan the HomeKit QR with the Home App (Find it on the devices or its package).
2. Group devices room by room.
3. Schedule the light to turn on/off at set times with light switches.
4. Change light color or temperature or customize more light effects.
5. Get Scenes and automations.
6. Set a “Leaving Home” scene to turn off the living room light and air conditioner.
7. When your camera detects motion, it triggers the light in the living room.
8. Now, your Tapo devices work with HomeKit.

1. Ensure Tapo Device is Set Up Correctly in the Tapo App
• Before integrating with HomeKit, ensure that your Tapo device is set up and functional in the Tapo app.
• Ensure the device is connected to Wi-Fi and working correctly within the Tapo app before trying to link it to HomeKit.


2. Check HomeKit Compatibility
• Verify that the Tapo device you're using supports HomeKit integration. Not all Tapo devices are HomeKit compatible, so check the product’s specifications or documentation.
• The HomeKit feature should be enabled in the Tapo app.


3. Confirm HomeKit Code
• Ensure that you're using the correct HomeKit setup code (usually a QR code or 8-digit code). This code is required to link the device to HomeKit.
• The HomeKit setup code is typically found on the device itself, in the product manual, or within the Tapo app under device settings.


4. Check Wi-Fi Network
• Ensure that your Tapo device and your iPhone (or iPad) are connected to the same Wi-Fi network (preferably 2.4 GHz, as many IoT devices don’t support 5 GHz Wi-Fi).
• If your device is connected to a different network or subnet, HomeKit will not be able to discover it.


5. Reset the Tapo Device
• If the device is not showing up or syncing with HomeKit, try resetting the Tapo device to its factory settings and reconfiguring it.
• To reset, typically hold the reset button on the device for 10-15 seconds, and then go through the setup process again in the Tapo app.


6. Update Firmware and App
• Ensure that both your Tapo device and the Tapo app are running the latest firmware and app versions.
• To update the app, visit the App Store. To update the firmware, you can do this directly in the Tapo app (go to device settings > firmware update).


7. Reboot the Router
• If your devices are still not showing up, try rebooting your Wi-Fi router. Sometimes, a simple router reboot can solve network communication issues between the Tapo device and your phone.


8. Re-add Tapo Device to HomeKit
• If the device was previously added to HomeKit but isn’t working anymore, you might need to remove it and add it back.
• Open the Home app on your iPhone or iPad.
• Find the device and remove it.
• Re-scan the HomeKit QR code or manually enter the 8-digit HomeKit setup code again from the Tapo app.


9. Check for Home Hub Connectivity
• If you're using an Apple Home Hub (e.g., Apple TV, iPad, or HomePod) to control your devices remotely, ensure that it is online and connected to the same HomeKit setup. Make sure the Home Hub is updated to the latest software version.


10. Check for Interference or Signal Issues
• Sometimes, interference from other devices or weak Wi-Fi signals can cause connectivity issues with HomeKit. Make sure there are no strong interfering signals or large distances between the router and your Tapo devices.
• Consider using a Wi-Fi range extender if your device is far from your router.


11. Disable VPN or Firewall
• If you are using a VPN on your phone, disable it temporarily. VPNs can block local network connections, which may prevent HomeKit from detecting your Tapo devices.
• Ensure that your firewall (if using one) isn’t blocking the necessary ports for HomeKit or Tapo communication.


12. Check HomeKit Hub Status
• Make sure that the HomeKit hub (Apple TV, HomePod, or iPad) is functioning correctly. It should be powered on, updated to the latest iOS version, and connected to the internet.
• If the HomeKit hub is offline, devices may not sync or work properly when away from home.


13. Review HomeKit Restrictions
• If you have any restrictions set on your device (e.g., parental controls, device management settings), they might block HomeKit functionality. Make sure HomeKit is allowed in the device settings.


14. Reboot Your iPhone or iPad
• Sometimes, simply restarting your iPhone or iPad can resolve HomeKit-related issues or connectivity problems.


15. Test with a Different Device
• If the Tapo device works on one iOS device but not another, try setting it up on a different device. There could be an issue with the HomeKit settings on your phone or the Home app.

• Apple HomeKit
• Google Home
• Alexa
• SmartThings

• Auto-Off
• Voice Control
• Remote Control
• Compact Design
• Away Mode
• Share to Family
• Multiple Safety Guarantees
• Integrate into any Matter Ecosystem

• IP65 Weatherproof
• 2 Independent Outlets
• Dual Antennas
• Matter-Certified
• Voice Control
• Remote Control
• Schedule
• Heavy-Duty Power
• Tapo P400M V1

• Apple HomeKit Support
• Compact and Flame-Retardant Design
• App and Voice Control
• Easy Set-Up
• Advanced Scheduling and Timer

• Physical Privacy Shutter
• 2K QHD
• Apple HomeKit compatible
• Smart AI Detection and Notification
• Easy Installation with Magnetic Base
• Invisible Infrared Lights Option
• Crisp Two-Way Audio
• Customizable Sound Alarm

• Very simple and requires low effort and time
• User-friendly
• Little bit of technical knowledge compared to other solution
• Premium service
• Has more than 2000 devices enabling them to plug in
• Offers seamless integration

1. Visit the Official Website

Go to the AddToHomeKit official website.



2. Choose the Wemo Ecosystem

Select the Wemo ecosystem to begin the setup process.



3. Pick Your Preferred Solution

On the next page, choose the solution that best fits your needs.



4. Select the Operating System

Choose the operating system you’re using for the installation.



5. Install the HomeBridge Plugin

Download and install the HomeBridge plugin according to your operating system.



6. Add to HomeKit

Tap on the “Add to HomeKit” option to start the integration.



7. Activate Your Account

Click on the Activation package to activate your account.



8. Follow On-Screen Instructions

Follow the instructions displayed on the screen to complete the setup.

• Control Wemo devices through the Apple Home app.
• Use Siri voice commands.
• Build automations and scenes with other HomeKit accessories.
• Simplify device management inside one ecosystem.

1. Install HomeBridge

Set up HomeBridge on a compatible device (like a Raspberry Pi or a computer). Follow the installation guide on the HomeBridge website.



2. Install Wemo Plugin

Use the HomeBridge interface to install the Wemo plugin.



3. Configure Wemo Devices

Enter your Wemo device details into the HomeBridge configuration file.



4. Add to HomeKit

Open the Home app, tap the “+” icon, and select “Add Accessory.” Follow the prompts to complete the setup.

1. Set Up HOOBS

Install HOOBS on a compatible device and follow the setup guide.



2. Add Wemo Plugin

Access the HOOBS dashboard, search for the Wemo plugin, and install it.



3. Configure Your Devices

Enter your Wemo device details as instructed.



4. Connect to HomeKit

Open the Home app, tap the “+” icon, and follow the steps to add your Wemo devices through HOOBS.

1. Check Compatibility

First, make sure your Wemo device is compatible with Apple HomeKit. Devices like the Wemo HomeKit doorbell or Wemo smart plugs are compatible, but it's always good to double-check.



2. Update Your Wemo Devices

Ensure that your Wemo devices are running the latest firmware. To do this, open the Wemo app:

• Open the Wemo app on your device.
• Navigate to the device settings and check for any available updates.
• Install any updates if available.


3. Set Up Your Wemo Device

If you haven’t set up your Wemo device yet:

• Open the Wemo app.
• Follow the instructions to connect your Wemo device to your Wi-Fi network.
• Ensure that your Wemo device is online and functioning properly.


4. Connect Wemo to Apple HomeKit

To connect your Wemo device to Apple HomeKit:

• Open the Home app on your iPhone or iPad.
• Tap the “+” icon to add a new device.
• Select “Add Accessory”.



Here’s where you’ll need the HomeKit setup code that comes with your Wemo device:

• Look for the HomeKit setup code on the device itself or its packaging.
• Scan the code using your iPhone or iPad’s camera when prompted by the home app.



If your Wemo device uses Wemo Thread, ensure that your Apple HomeKit setup supports Thread connectivity.



5. Assign Your Wemo Device to a Room

After scanning the code, the home app will recognize your belkin device:

• Assign it to a specific room within the home app for easier management.
• Name the device to match its function (e.g., “Living Room Light” or “Front Doorbell”).


6. Customize Automations and Scenes

With your Wemo device added to Apple HomeKit, you can now create custom automations and scenes:

• In the Home app, navigate to the “Automation” tab to set up routines based on time, location, or other triggers.
• Combine your Wemo devices with other HomeKit-compatible devices to create scenes (e.g., “Movie Night” scene that dims lights and turns on your Wemo smart plug).

• Compact Design

The wemo smart plug homekit is notably smaller than many other smart plugs, allowing you to use it without blocking adjacent outlets.



• Remote Control

Using the Wemo app, you can control the Mini Smart Plug from anywhere. Whether you're at home or on the go, you can turn devices on or off and monitor their status directly from your smartphone.



• Voice Control

The Wemo Mini is compatible with major voice assistants, including Amazon Alexa and Google Assistant.



• Scheduling and Automation

With the Wemo app, you can set schedules and automation for your devices. you can program the Mini Smart Plug to turn on your coffee maker at a specific time each morning or set it to turn off a lamp when you go to bed.



• Energy Monitoring

Some versions of the Wemo Mini Smart Plug come with energy monitoring capabilities, allowing you to track and manage the energy consumption of the devices plugged into it.



• Easy Setup

The setup process is straightforward. Simply plug the Wemo Mini into an outlet, connect it to your Wi-Fi network via the Wemo app, and follow the on-screen instructions to add it to your smart home system.

1. Ensure Wemo Device is Powered On

Make sure the Wemo device you are trying to add is powered on and connected to your Wi-Fi network.



2. Update Wemo Device Firmware
• Check if your Wemo device has the latest firmware. Sometimes, firmware updates improve compatibility with HomeKit.
• You can update the Wemo device using the Wemo app.


3. Check Home App & iOS Version
• Ensure your iPhone or iPad is running the latest iOS version, as HomeKit features can require the most recent updates.
• The Home app must be up to date for optimal compatibility with new devices.


4. Ensure Wemo and iPhone are on the Same Wi-Fi Network
5. Use the Correct HomeKit Setup Code
• When adding a Wemo device to HomeKit, you need to scan the HomeKit setup code that comes with the device or shown in the Wemo app.
• Ensure you're scanning the correct code and it’s within the valid timeframe (usually a few minutes after initial setup).


6. Reset the Wemo Device
7. Reboot Your Wi-Fi Router
8. Disable 5GHz Wi-Fi (if using 2.4GHz)

HomeKit and Wemo devices typically work best with a 2.4GHz Wi-Fi network. If your router uses both 2.4GHz and 5GHz networks, ensure the Wemo device connects to the 2.4GHz band. Some routers combine both bands into one network name, which could cause issues.

• Wemo devices that were already added to Apple HomeKit before 2026 can still work locally.
• You can continue controlling them through the Apple Home app.
• Thread-based Wemo devices are still more stable inside HomeKit setups.

• Easy to use - Plug-and-play solution
• Modular - More than 2000 different plugins and devices to select
• No technical knowledge required

1. Control your Roomba using Siri.
2. Start cleaning remotely.
3. Create automation scenes.
4. Trigger cleaning when leaving home.
5. Monitor battery and status.

• iRobot Roomba s9+
• iRobot Roomba j7+
• iRobot Roomba i3
• iRobot Roomba 694
• iRobot Roomba j7

1. Download the iRobot app from your iPhone.
2. Then, open the Apple Shortcut app.
3. Click on the plus button.
4. On the search bar, type iRobot.
5. Now, you’ll see commands like Clean everywhere, Send robot home, and more. You can also create custom shortcuts.
6. Pick one shortcut for the first time.
7. Tap robot in blue color > pick specific smart vacuum > tap the tiny arrow > set the cleaning mode.
8. If you want to rename it, tap on the name and pick rename.
9. Tap Done to build this and save it.

1. Install Homebridge - Install Homebridge on Mac/PC
2. Install Ring Plugin - sudo npm i -g @homebridge-plugins/homebridge-roomba.
3. Follow Setup to get Roomba credentials.
4. Enter Roomba's credentials in your config. json file.
5. Restart Homebridge.

1. Homebridge iRobot- You can get amazing features like room-by-room control on models, on/off control, bin full detection, battery percent/charging information, and auto-discovery of all devices on your account.
2. Homebridge Roomba STV- You’ll have many features when installing this plugin, such as Roomba start on demand, Roomba stop, demand, Roomba charging status, and checking the Roomba battery level.
3. Homebridge Roomba- You can control your iRobot through Apple HomeKit. It is available only for the 800 and 900 series with V2.0 or higher.

1. Connect HOOBS to your network
• First, you need to unbox your HOOBS in a box, then connect it to your networkFirst, you need to unbox your HOOBS in a box, then connect it to your network
• Next, power on your device. It takes a few seconds for the initial installation
• After that, you’ll be needed to open the Wi-Fi setting on your device (Phone or Laptop) and connect to the HOOBS network
• Once you connect to the HOOBS network, a popup window will appear. Select your WiFi name > Enter your password
• Finally, HOOBS is connected to the Wi-Fi network


2. Open the HOOBS interface on your Browser
• Now, you need to open your browser and go to http://hoobs.local.(For the first-time user, the username and password will both be “admin”)
• If you want to change the username and password, you can change them later


3. Install the Roomba Plugin for HOOBS
• Before installing the Roomba Plugin, you need to go on to hoobs.local from your browser
• Then, you’ll see the plugin tab on the left side of the screen, and click on that. Type “Roomba stv” in the search bar. (Roomba stv is a HOOBS-certified plugin)
• Click on the install button and it takes a few minutes to download the Roomba Apple Homekit Hoobs


4. Obtain the IP address of the Roomba
• Before obtaining the IP address of the Roomba, go to your iRobot app. After that, navigate to the settings, Wi-Fi settings, and then Robot Wi-Fi details
• Check whether the IP address number format is correct(192.168.XX.XX)


5. Configure the Roomba Stv Plugin
• Go to the HOOBS page and then click on the three dots. Next, you’ll see the terminal and click on that
• Type the following command on the terminal

cd /home/hoobs/.hoobs/node_modules/dorita980 && npm install && node ./bin/get password.js "192.168.x.x"

(Note: Enter your IP address instead of 192.168.XX.XX)

• You may see some warning message and don’t press any key After it is finished running
• Make sure your Roomba is powered on and on HomeBase
• When the power is on, you can see a green light. (Press and hold the home button > When you hear a tone release it > Roomba will flash the Wi-Fi light)
• Once your Roomba flashes the Wi-Fi light, go to the HOOBS window. Then, click on any key
• After that, you’ll see a message and section showing the BLID and Password
• Go to the settings in your HOOBS window and then go to Roomba > click Add Accessory > Enter your Roomba name and then model number > Fill in the BLID, IP address, and password
• Next, you’ll need to enable these settings

Auto-refresh - Yes

Keep-Alive - Yes

TTL cache - 30

1. Setup your robot on the dock with the dock plugged
2. Verify Bluetooth is turned ON and you are on the Correct Network
3. Select “Add Robot” in the App
4. Follow the app instructions to connect Roomba® to your Wi-Fi
5. Setup complete

1. Check for Plugin/App Updates
• If you’re using a third-party plugin or app (e.g., Home Assistant, iRobot HOME app, or a custom integration), check if the developer has released an update to support the new Roomba firmware.
• Update the plugin or app to the latest version.


2. Reconnect the Roomba:
• Sometimes, firmware updates can reset or disrupt the connection between the iRobot and the app or plugin.


3. Check the Plugin/App Documentation
• Visit the official documentation or support page for the plugin or app you’re using. Look for any notes about compatibility with the latest Roomba firmware.
• If the plugin is community-developed (e.g., for Home Assistant), check the GitHub repository or forums for updates or workarounds.


4. Roll Back the Firmware (If Possible)
• Some Roomba models allow you to roll back to a previous firmware version. Check iRobot’s support site or contact their customer service to see if this is an option.
• Note: Rolling back firmware may not always be possible or recommended.


5. Use Official iRobot App
• If the third-party plugin is not working and no fix is available, consider using the official iRobot HOME app temporarily until the plugin is updated.


6. Consider Alternative Integrations
• If the plugin is no longer maintained or compatible, look for alternative integrations or plugins that support your Roomba model and firmware version.

• Provides user-friendly Interface
• Supports a wide range of smart home devices
• Offers step-by-step instructions and troubleshooting tips

1. Go to the official AddtoHomeKit website.
2. Select the Nuki ecosystem and proceed to the next page.
3. Select your preferred solution.
4. Choose the appropriate Operating System.
5. Install the HomeBridge Plugin.
6. Tap on Add to Home
7. Follow the provided instructions

• Supports multiple smart home protocols, including Zigbee and Z-Wave
• Allows to create advanced automation rules and scenes
• Improves the connectivity and responsiveness of your smart home setup

1. Purchase and install the ATH Bridge

Purchase the ATH Bridge and connect it to your home network.



2. Configure the Bridge

Follow the setup guide to configure the ATH Bridge with your home network.



3. Integrate with HomeKit

Use the ATH Bridge’s integration features to connect with HomeKit and add the bridge to the home app and connect it with your Nuki devices.



4. Create Automations

Set up automation rules and scenes in the home app to control your Nuki devices.

• Connects a wide range of devices
• Customizable Plugins
• Provides advanced configuration options

1. Install HomeBridge on Mac / PC

If you haven’t installed Homebridge previously, you need to install home bridge on your Mac / PC before installing the Nuki HomeBridge plugin.



2. Edit the configuration file

To use add Nuki plugin to your HomeBridge config.json using the below command:

{
    "name": "Nuki",
    "username": "your-nuki-email",
    "password": "your-nuki-password",
    "platform": "Nuki"
}



3. Run the Nuki Plugin
4. Control devices on HomeKit

For that you want to go to the Home App on your Apple device and scan the QR code of your Homebridge UI. Then, you can control your Nuki devices with HomeKit.

1. Ensure HomeBridge is Running: Open the HomeBridge UI and check if the Nuki plugin is loaded properly. Restart HomeBridge if necessary.
2. Verify Plugin Installation: Ensure you have installed the correct Nuki pluin (homebridge-nuki) or (homebridge-nuki-smart-lock). Update the pluin if needed.
3. Check API Setting: Go to the Nuki app, navigate to Settings > Manage Bridge > Api and ensure the API is enabled.
4. Confirm Local Network Access: If you are using the Nuki Bridge, check that it is on the same Wi-Fi network as your HomeBridge server.
5. Validate Nuki Bridge IP Address: If HomeBridge relies on a static IP, confirm that the Nuki Bridge has a reserved IP in your router settings.
6. Restart Nuki Devices: Power cycle both the Nuki Smart Lock and the Nuki Bridge to refresh connections.
7. Check Log Files: Look at the HomeBridge logs for errors related to the Nuki plugin and troubleshoot based on the messages.
8. Test API with Browser: Open a browser and enter http://<nuki_bridge_ip>:8080/info, replacing <nuki_bridge_ip> ith your Nuki Bridge's IP address. If this fails, check network and API settings.

• Seamlessly integrates with Apple Home
• Easy setup
• Affordable solution
• Best alternative to Homebridge
• Plug-and-play solution

1. Install HOOBS on a Raspberry Pi or any other suitable hardware.
2. Visit the HOOBS dashboard.
3. Go to the Home App.
4. Select "Add Accessory".
5. Select the HOOBS server.
6. Scan the QR code displayed on-screen.
7. Finally, follow the on-screen instructions.

• Operate Nuki via voice commands with Siri
• Integrate Nuki into HomeKit automations and scenes
• Get notifications on Apple devices (iPhones, Apple Watch, etc.)
• Other Apple users can operate the devices.
• Connect Nuki with other smart devices

1. Open the Apple HomeKit app on your smartphone
2. Click on the ‘+ icon’ at the top right of the screen
3. Choose ‘New accessory’
4. Scan the HomeKit QR code of your Nuki Smart Door lock
5. Assign the smart door lock to a room

1. Ensure HomeKit Compatibility: If you are using the Nuki Smart Lock 3.0 Pro, it should natively support HomeKit. The standard Nuki 3.0 requires a Nuki Bridge for integration.
2. Reset HomeKit Pairing: In the Nuki app, go to Setting > HomeKit, remove the existing pairing and re-add it.
3. Check HomeKit Code: When pairing, ensure you are using the correct HomeKit QR code found in the Nuki app under Settings > HomeKit.
4. Verify Bluetooth and Wi-Fi: The Nuki Smart Lock needs a stable Bluetooth connection and must be on the same Wi-Fi network as your HomeKit hub (Apple TV, HomePod or iPad).
5. Restart Devices Restart your Nuki Smart Lock, HomeKit hub and iPhone to refresh connections.
6. Update Firmware & iOS: Mke sure your Nuki device firmware and iOS are up to date.
7. Check Home App & iCloud: Ensure your iCloud account is signed in and Keychain is enabled under iCloud settings.
8. Factory Reset Nuki: As a last resort, perform a factory reset on the Nuki Smart Lock and set it up again from scratch.

1. Go to ‘Settings’
2. Click on ‘Functions & Integrations’
3. Choose ‘Activate Nuki Web’
4. Also select ‘Amazon Alexa’ under ‘Functions & Integrations’
5. Now click on ‘Connect’

1. Acquire a Matter Controller compatible with the smart home platform you prefer, example. Apple HomePod, Apple TV
2. Download the Home app.
3. Set up devices with Nuki app or the by scanning the Matter QR code.
4. In the app, manage the Matter connection.

• Lock or unlock your door via your smartphone
• Automatic unlocking when you’re nearby
• With built-in Wi-Fi for remote access
• Nuki Power Pack included
• Also available in white
• Complete control over who can open your door

1. Install HOOBS (or use prebuilt HOOBS box)
2. Install plugins for your devices (e.g., Ring, Nest, Tuya)
3. Connect your accounts.devices
4. Pair HOOBS with Apple Home using QR code
5. Control everything va Apple Home + Siri

1. Visit the official AddtoHomeKit website.
2. Choose the Reolink ecosystem and proceed to the next page.
3. Select your preferred solution.
4. Choose the appropriate Operating System.
5. Install the HomeBridge Plugin.
6. Tap on AddtoHomeKit.
7. Follow the provided instructions and enjoy!

1. Install HomeBridge on Mac/PC
2. Install Reolink Plugin
3. Edit the configuration file

After the plugin is installed, you need to add a new platform for the Reolink HomeBridge plugin and include username and password as below:

{
    "name": "Reolink",
    "username": "your-reolink-email",
    "password": "your-reolink-password",
    "platform": "Reolink"
}

4. Run the plugin
5. Control devices on HomeKit
6. Install HomeBridge on Mac/PC

1. Centralized Control: By doing this, you can control your security cameras and other smart devices from a single platform.
2. Enhanced Security: You can monitor your home security through the Home app.
3. Automation Features: This allows you to automate tasks like turning on lights and improving security.

• Reolink Duo PoE
• Reolink Duo Wi-Fi
• Reolink Duo(battery)
• Reolink Duo 4G
• Reolink Go
• Reolink Go PT

• Chromecast device
• TV with Chromecast
• Media player with Chromecast
• Google Home Hub; The Google Home and Google Assistance App

1. Download the Reolink App and log in to your cloud account.
2. Tap the Smart Home.
3. Tap the Enable button to enable the device you want to add to Google Home.

Note: When the camera is successfully enabled, the button will be shown as Unbind.



4. Launch the Google Home, sign in your account and then Get Started to create a home.
5. Name your home and click the Next and Yes buttons.
6. Connect the Wi-Fi network you would like to use with your Chromecast, then you can customize a room name, which will be added to your room list.
7. Tap Devices > Add device > Works with Google Home.
8. After adding log in your Reolink account and then tap Log in. Tap Allow.

• The smart home App device page does not detect the camera.
• The camera can be seen in the list of Google Home App devices, but cannot be previewed on the Google Home App.
• Failed to load the camera image on Google Home screen devices after using voice command.

Devices Needed for Alexa Integration

• Reolink camera
• Amazon Echo show or an Amazon Echo Spot
• Reolink App and Amazon Alexa App on your mobile device.

1. Download the Reolink App and log in to your Reolink account.
2. Tap Cloud > Smart Home option.
3. Enable the device you want to add to Amazon Alexa on the Smart Home page.

Note: When the camera is successfully enabled, the button will be shown as Unbind.



4. After adding open the Alexa App. Tap + in the upper right corner, tap Add Device.
5. Choose Camera > Reolink Brand.
6. After you will see some prompts. When you have confirmed all of them, tap Yes for each one.
7. Connect Reolink Account to your Alexa App.
8. Tap Enable to use Smart Home Skills.
9. Log in your Reolink account (make sure it is the same one that the device is linked to).
10. Tap Log in and tap Allow.
11. After logging in successfully, then tap Next to complete.
12. Then, you can customize some settings for the camera, such as adding it to a group or SKIP to finish the setup.
13. Once completed, these cameras will all appear on the device list page.

1. Open the Amazon Alexa app and go to Devices > All Devices.
2. Find your Reolink Doorbell camera from the list of All Devices.
3. Tap on the Settings icon.
4. Select the Announcement Device that you want to use as a doorbell chime.
5. Enable voice notifications based on your preferences (Motion/Person/Doorbell Press).

• The smart home App device page does not detect the camera.
• The camera can be seen in the list of Alexa App devices, but cannot be previewed on Alexa App.

Note:only the Reolink doorbell camera support be viewed on Alexa App.



• Failed to load the camera image on Alexa after using voice command.

• Only 3 steps to access cameras and NVRs (at the same local network).
• Easy and friendly interface for all users to use.
• Remotely monitor and watch live streaming via 3G/4G or Wi-Fi.
• Multi-channel viewing (up to 16 channels) on screen at the same time.
• Remotely playback video recording from your camera SD card and NVR HDD.
• Capture video from live view channels on your mobile device to playback.
• Capture single and multiple images.
• Get emails or push notifications in real time when motion detection is triggered.
• Schedule video recording (including motion-triggered recording).
• Control PTZ (pan-tilt-zoom) cameras remotely (left, right, up and down).

• Check Compatibility: Ensure your Reolink device supports HomeKit and update its firmware.
• Use a Home Hub: Set up an Apple TV, HomePod, or iPad as a home hub.
• Network Setup: Connect to 2.4 GHz Wi-Fi, ensure a stable connection, and disable AP isolation.
• Add to HomeKit: Scan the HomeKit QR code or manually enter the setup code in the Home app.
• Restart Devices: Restart your Reolink device, router, and Apple hub.
• Update Software: Ensure your iOS device and Home app are up to date.
• Use a Bridge: If unsupported, use Homebridge integration.

1. AddtoHomeKit [My Personal Favourite]
2. ATH Bridge
3. HomeBridge

• A huge variety of ecosystems we can choose from to AddtoHomeKit.
• Both app and web solutions are available.
• Provides plugins and step guides within the same place.
• Easy and requires low to no time and effort.
• One of the drawbacks would be that it requires a tiny bit of technical knowledge.

1. Allows you to add any device to Apple HomeKit.
2. Budget friendly, and it was in my opinion, actually worth the money.
3. Effortless set up process.
4. Small and compact, it fits right in any home!

• Xiaomi Camera - Enhance home security with MI camera, automating recording and notifications through HomeKit routines and scenes.
• Xiaomi Lamp - Use Apple Home app to control Xiaomi smart lamps, adjusting brightness and colour to create personalized lighting environments.
• Xiaomi Fan - Automate Xiaomi fans to maintain ideal temperature using HomeKit’s seamless integration for schedules and automation.
• Xiaomi Gateway - Centralize control of Xiaomi smart devices through the gateway, enabling cross-device automation and voice control.
• Xiaomi Bulb - Customize lighting with Xiaomi HomeKit bulbs, using HomeKit to set colours, intensity and schedules effortlessly.
• Xiaomi Air Purifier - Use HomeKit to automate Xiaomi air purifiers, ensuring consistent air quality with scene-based control and automation.
• Mi Home Kit Air Purifier - Integrate Xiaomi air purifiers into HomeKit for scheduled operation and real-time monitoring to improve your home’s air quality.

• Beginner-friendly setup – no complex coding required
• Step-by-step guides included – everything is explained clearly
• Wide compatibility – supports many Xiaomi and other smart home devices
• Flexible options – available as both a web and app solution

• Setup takes very little time
• Devices connect smoothly
• Easy to follow even for non-technical users

1. Go to the AddtoHomeKit official website.
2. Select the Xiaomi ecosystem.
3. You will be redirected to the next page, select your preferred solution.
4. Afterwards, you must select the Operating System.
5. Install the HomeBridge Plugin.
6. Tap on the AddtoHomeKit.
7. Follow the instructions provided and enjoy!

1. Prepare your Network:

Make sure you have a stable WiFi network available, both your iOS device and HOOBS to the same Wi-Fi network.



2. Visit the HOOBS Website:

You must flash the HOOBS image onto a microSD card using appropriate software (eg: BalenaEtcher or Raspberry Pi Image). Now, insert the microSD into the Raspberry Pi. Acquire and install HOOBS.



3. Boot up HOOBS:

After the installation of HOOBS. Connect your Raspberry Pi to power and wait for HOOBS to boot up. HOOBS will appear as a Wi-Fi network namely “hoobs.local”, connect your device to this network.



4. Access HOOBS Dashboard:

Visit http://hoobs.local and follow the on-screen instructions to complete the initial setup of HOOBS. You would most likely need to set up your admin account and connect HOOBS to your Wi-Fi network.



5. Access HOOBS Configuration:

After completing the setup, you will be directed to the HOOBS dashboard where you can manage plugins and configure devices.



6. Install Xiaomi Plugin:

In the HOOBS dashboard, click on “Plugins” in the sidebar. Search for “Xiaomi” in the Plugins Marketplace. Click “Install”.



7. Configure the Xiaomi Plugin:

Add Xiaomi Devices to HomeKit.

1. Install HomeBridge

Set up HomeBridge on a compatible device like a Raspberry Pi, or your Computer.



2. Add the Xiaomi Plugin

Use the HomeBrigde UI or terminal to install the Xiaomi plugin homebridge-miot or similar. A plugin that is specific to your devices.



3. Obtain Device Token

Retrieve your Xiaomi device token using tools like the Mi Home App or third-party scripts.



4. Configure Plugin

Edit the HomeBridge configuration file config.json with the device token, IP address and plugin settings.



5. Restart HomeBridge

Restart HomeBridge to load the Xiaomi plugin.



6. Pair with HomeKit

Open the Home app, scan the HomeBridge QR code, and enjoy Xiaomi devices in HomeKit.

• Matter Compatibility - Easily integrate Matter-certified devices.
• Multi-Protocol Support – Zigbee 3.0, Bluetooth, Bluetooth Mesh and Wi-Fi ensure compatibility with a wide range of devices.
• Apple Home App Integration – Xiaomi ecosystem can be directly managed through the Apple Home app on iOS.
• Fast Response Time - Zigbee 3.0 ensures low latency device communication and stable connections.
• Automation Ready – Create complex automation routines using the MI Home app, connecting sensors, lights and more.

• Xiaomi Smart Home Hub 2
• Aqara Hub M3
• Xiaomi Smart Door Lock
• Xiaomi Smart Air Purifier
• Xiaomi Robot Vacuum Cleaner

• Voice control  
• Routine automation 
• Cloud-based control  

1. Visit the MI Home app on your iOS/ Android.
2. In case you have not already, configure every device you own after logging in.
3. Launch the Alexa app on your mobile device or visit Alexa Amazon to access the Alexa web interface.
4. Navigate to the Devices section after selecting one of the options.
5. Turn on Your Digital Home Skills.
6. Locate and set up the My Home skill.
7. To grant permission, log in using your Mi Home login credentials and follow the instructions.
8. That's all!

1. Navigate to More located in the Alexa app’s lower left corner.
2. Select Workouts.
3. Tap the + button located in the top-right corner of the screen.
4. Give your routine a name so you can recognize it later on in the menu.
5. Assign a trigger that will initiate the action in the When field. It could be a sound, a voice command, actions of a sensor, activity that was previously recirded by another device or a specific moment in time.

Example of time-based trigger: Select TimeTable. The routine’s action date will then be set up as “10:00am XNUMX.

6. Select Add Action. There will be a long list of options.

• Automate Lighting - Use Xiaomi Mi Motion-Activated Night Light 2 with Alexa to create routines for automatic on/off, brightness and colour adjustments.
• Smart Bulbs – Control Xiaomi Smart Bulbs via Alexa to regulate intensity, colour, or stimulate presence when travelling.
• Energy Efficiency – Transform regular devices into smart ones with Refoss Smart Plugs, automating power usage for convenience and savings.
• Air Quality Automation – Schedule Xiaomi (MI home kit) air purifiers or humidifiers to operate at specific times, ensuring optimal indoor air quality
• Enhanced Security – Integrate Xiaomi Basic Camera Privacy with Alexa routines and sensors for custom, automated security setups.
• Temperature Control – Pair Xiaomi Smart Convector Heater 1S with a temperature sensor and Alexa to maintain ideal room conditions automatically.
• Effortless Cleaning – Program Xiaomi Mi Robot Vacuum-Mop 2 Ultra to clean when you are away, avoiding noise and maximizing efficiency.
• Sensor-Based Workflows – Automate lighting, heating or cooling using Xiaomi sensors like motion or temperature, creating smart routines with Alexa.

• Zigbee 3.0   
• Wi-Fi  
• Bluetooth and Bluetooth Mesh  

• Not all Xiaomi devices are supported  
• Compatibility depends on specific models  
• Some features may not fully sync with HomeKit 

• Device control
• Automation setup 
• Room organization  
• Remote access  
• While it works well  

1. Install HomeBridge on a device such as Raspberry PI or a device running Node.js
2. Find a HomeBridge plugin that is compatible with Ring Cameras (you can find it through npm registry or GitHub) and install the Plugin.
3. After installing the plugin, you must configure it.
4. Edit your HomeBridge config.json file and add a new platform for the Ring plugin and enter the username and password given below”.
5. Install the plugin using npm.
6. After configuring the plugin, restart HomeBridge.
7. Pair with HomeKit: Open the Home App, you will see the Ring Cameras that you configured earlier in the HomeBridge plugin. Now you can add the items to your HomeKit setup.

1. Open the Ring app.
2. Tap the three lines in the top left corner to open the menu.
3. Tap Devices.
4. Tap the Ring camera to disable from the list.
5. Tap the Motion Detection toggle on the right.
6. Tap the disabled Motion Detection button on the pop-up warning to confirm.
7. Tap Stop Recording on the confirmation screen.

1. Open the Ring app.
2. Tap the three lines in the top left corner to access the menu.
3. Tap Settings.
4. Tap Modes.

Note: if you haven’t enabled the modes feature yet you’ll see Enable Modes instead. This will give you the option to use default settings or customize them. Use the default settings, and then change the ones you want to be using this process.



5. Tap the mode you wish to change (Disarmed, Home, or Away).
6. Tap the Ring Camera you wish to turn off from the list.
7. Tap the toggle switch next to Motion Detection and Live View to turn them off.
8. Tap Save in the top right corner.

• A user-friendly tool to effortlessly connect google thermostat to Apple HomeKit.
• Overcomes the limitations of the HomeBridge solution.
• Ensures a straightforward installation experience.
• Solutions for various ecosystems and operating systems.
• Can control nest devices using Siri voice commands and the Apple Home app.
• HomeKit Notifications for nest devices.

1. Visit the official AddToHomeKit page.
2. Choose your preferred ecosystem.
3. Select your desired solution (e.g., Athom Bridge).
4. Pick the operating system you’re using.
5. Download and install the HomeBridge plugin.
6. Choose the activation package.
7. Follow the on-screen instructions provided.

• Budget-Friendly
• Straightforward
• Plug-and-Play
• Unlimited HomeBridge plugins
• Tiny design

• Compact device
• Dedicated smart home bridge
• Seamless connectivity for over 2,000 accessories
• Supports integration with any of these platforms (Google Home, Amazon Alexa, or Apple HomeKit)

1. Install HOOBS on a Raspberry Pi or compatible hardware.
2. Open the HOOBS dashboard.
3. Go to the Home app.
4. Select “Add Accessory.”
5. Choose the HOOBS server.
6. Scan the QR code.
7. Follow the on-screen instructions provided.

• Integrates non-HomeKit devices with Apple HomeKit.
• Extensive plugins for tailored functionality. Extensive plugins for tailored functionality.
• Manage all smart devices in one app.
• Avoid replacing existing devices for HomeKit compatibility.

1. Install HomeBridge

Set up HomeBridge on your chosen platform. This is typically done on a device like a Raspberry Pi or a computer running Node.js.



2. Install Plugins

Find a compatible HomeBridge plugin for nest thermostat, available from the npm registry or GitHub.



3. Configure the Plugin

After installing the plugin, you need to configure it. Edit your HomeBridge config.json file. Add a new platform for the nest plugin and include username and password as below:

Install the plugin using npm: Make sure to replace "your_nest_email@example.com" and "your_nest_password" with your nest login authorization.

{    
  "name": "nest",    
  "username": "your-nest-email",    
  "password": "your-nest-password",    
  "platform": "nest" 
  }



4. Restart HomeBridge

After configuring the plugin, restart HomeBridge to apply the changes.



5. Pair with HomeKit

Open the Home app. You should see the Nest devices you configured in HomeBridge. Add them to your HomeKit setup, and you’ll be able to control them through the home app or with Siri.

1. Ensure Proper Homebridge Setup
• Homebridge is Installed and Running: Make sure Homebridge is properly installed and running. If you're using a Raspberry Pi or another system, check the Homebridge logs to ensure there are no errors.
• Homebridge-Nest Plugin: The Homebridge Nest plugin (which connects Nest with HomeKit) must be installed and configured correctly. Check that you're using the latest version of this plugin.


2. Check Nest Account Permissions
• Nest API Access: Ensure that you’ve connected Homebridge to your Nest account properly via the Google Nest developer API. Verify that the client_id, client_secret, and access_token are correctly set up in your Homebridge configuration.
• Reauthorize Access: Sometimes, the access token can expire or be revoked. Try reauthorizing access through the Nest Developer Console or Homebridge config.


3. Verify Homebridge Configuration
• Configuration File: Double-check your Homebridge configuration file (config.json) for any errors. Ensure that the Nest plugin is correctly configured with the required parameters such as:

{
  "platform": "Nest",
  "client_id": "YOUR_CLIENT_ID",
  "client_secret": "YOUR_CLIENT_SECRET",
  "code": "YOUR_AUTHORIZATION_CODE",
  "access_token": "YOUR_ACCESS_TOKEN",
  "homebridge": {
    "platforms": [
      {
        "platform": "Nest",
        "client_id": "your-client-id",
        "client_secret": "your-client-secret",
        "access_token": "your-access-token"
      }
    ]
  }
}




If you are using an access_token method, ensure it hasn’t expired.



4. Check Network and Connectivity
• Local Network: Ensure that your Nest Thermostat and the device running Homebridge are connected to the same local Wi-Fi network.
• Firewall: If you're using a firewall, make sure that Homebridge and the Nest API have the required ports open to communicate effectively.


5. Restart Devices
• Restart Homebridge: Restart your Homebridge server to apply any changes to the configuration or updates to plugins.
• Restart Nest Thermostat: Sometimes, the thermostat itself may need to be rebooted if it’s not responding or syncing properly with HomeKit.


6. Update Software
• Update Homebridge & Plugins: Ensure that Homebridge and the Nest plugin are updated to their latest versions. Updates often contain bug fixes or improvements that can resolve compatibility issues.
• Update Thermostat Firmware: Make sure your Nest Learning Thermostat has the latest firmware. Check the Nest app for any available updates.


7. HomeKit Troubleshooting
• Re-pair with HomeKit: If the thermostat isn't showing up in HomeKit, try unpairing it and then re-pairing it by scanning the HomeKit code in the Nest app.
• Reset HomeKit Cache: Sometimes HomeKit’s cache might cause issues with devices. You can try removing the thermostat from the Home app and adding it back.


8. Check Homebridge Logs
• View Logs: The Homebridge logs can provide valuable insight into what might be going wrong. Look for any error messages or warnings related to the Nest plugin or HomeKit integration.


9. Use Homebridge Web Interface
• If you're using the Homebridge UI, check if your Nest thermostat appears as a device in the dashboard. If not, try restarting the Homebridge service or reloading the plugin.


10. Factory Reset (Last Resort)
• If nothing else works, you might need to perform a factory reset on the Nest thermostat and go through the entire setup process again. Be sure to note down your configuration settings before doing this.


• Additional Tip: Use Alternative Plugin

If the official Homebridge Nest plugin is causing too many issues, consider trying an alternative plugin (such as homebridge-nest-thermostat or others) that supports integration between Nest and HomeKit.

• Nest temperature sensors may not appear inside Apple Home
• Advanced scheduling still requires the Google Home app
• Energy usage reports remain exclusive to Google Home
• Some eco mode features are not fully exposed in Apple Home

1. 2020 Nest Thermostat with Matter update
2. Android smartphone
3. Google Home app
4. iPhone or iPad with iOS 16.4 or higher
5. Nest Thermostat software version 1.3 or higher

1. Open the Google Home App on your iPhone or iPad (running iOS 16.4 or higher).
2. Tap on Devices and navigate to your Nest Thermostat.
3. Tap on the settings icon.
4. Tap Linked Matter apps & services.
5. Tap Link apps & service.
6. Copy the pairing code that appears and open the Apple Home app on your phone.
7. Tap + in the top-right corner.
8. Choose Add Accessory from the drop-down menu.
9. Scan a code. For that, tap more options.
10. Tap Google Nest Thermostat in the list of accessories that appear.
11. If it doesn’t show up, tap My Accessory isn’t Shown Here and then tap Enter code.
12. Paste the code you copied into the Setup Code dialogue box that appears.
13. Tap Continue.
14. Choose a room to add the thermostat to.
15. Name the thermostat.

1. Open the Google Home app.
2. Tap Favorites or Devices
3. Select your thermostat.
4. Change the mode, tap Temperature mode and select the one you want.
5. Tap and drag the dial clockwise or counterclockwise to increase or decrease the temperature
6. Tap + or – to increase or decrease the temperature 1° at a time.

• A user-friendly tool to effortlessly connect google thermostat to Apple HomeKit.
• Overcomes the limitations of the HomeBridge solution.
• Ensures a straightforward installation experience.
• Solutions for various ecosystems and operating systems.
• Can control nest devices using Siri voice commands and the Apple Home app.
• HomeKit Notifications for nest devices.

• Budget-Friendly
• Straightforward
• Plug-and-Play
• Unlimited HomeBridge plugins
• Tiny design

• Compact device
• Dedicated smart home bridge
• Seamless connectivity for over 2,000 accessories
• Supports integration with any of these platforms (Google Home, Amazon Alexa, or Apple HomeKit)

• Integrates non-HomeKit devices with Apple HomeKit.
• Extensive plugins for tailored functionality. Extensive plugins for tailored functionality.
• Manage all smart devices in one app.
• Avoid replacing existing devices for HomeKit compatibility.

• Smart Temperature Control
• Energy Savings Features
• Affordable Design
• Quick Installation
• HVAC Monitoring

• Self-Learning Capabilities
• Auto-Schedule
• Energy History and Reporting
• Far-Field Sensors
• Premium Build
• Works with Remote Sensors
• Advanced HVAC Monitoring

1. Visit the AddtoHomeKit Website.
2. Select the Nest Ecosystem.
3. Choose your preferred Solution.
4. Choose your preferred Operating System.
5. Install the HomeBridge Plugin.
6. Choose your preferred Plugin.
7. Install the plugin.
8. Follow on-screen instructions.

1. Install HomeBridge:

First, you need to install HomeBridge using npm:

Install Node.js > Open the terminal > Type “npm install -g homebridge”   

2. Install HomeBridge Plugins:

sudo npm install -g homebridge-nest   

3. Configure HomeBridge:

You need to configure your HomeBridge by editing the config.json file located in the~/.homebridge directory.

      { 
    "platforms": [ 
        { 
            "platform": "Nest", 
            "username": "YOUR_NEST_USERNAME", 
            "password": "YOUR_NEST_PASSWORD", 
            "devices": [ 
                { 
                    "name": "Your Nest Device Name", 
                    "type": "YourDeviceType" 
                } 
            ] 
        } 
    ] 
} 
 

4. Start HomeBridge:
5. Add HomeBridge to HomeKit:

Open the Home app on your iOS device. After tap the “+” icon to add an accessory. Then scan the QR code displayed in the HomeBridge console or manually enter the HomeKit setup code.



6. Control Your Devices:

After successfully adding HomeBridge to HomeKit, you can control your Nest Thermostat via the home app.

• Nest temperature sensors may not appear inside Apple Home
• Advanced scheduling still requires the Google Home app
• Energy usage reports remain exclusive to Google Home
• Some eco mode features are not fully exposed in Apple Home

1. 2020 Nest Thermostat with Matter update
2. Android smartphone
3. Google Home app
4. iPhone or iPad with iOS 16.4 or higher
5. Nest Thermostat software version 1.3 or higher

1. Open the Google Home App on your iPhone or iPad (running iOS 16.4 or higher).
2. Tap on Devices and navigate to your Nest Thermostat.
3. Tap on the settings icon.
4. Tap Linked Matter apps & services.
5. Tap Link apps & service.
6. Copy the pairing code that appears and open the Apple Home app on your phone.
7. Tap + in the top-right corner.
8. Choose Add Accessory from the drop-down menu.
9. Scan a code. For that, tap more options.
10. Tap Google Nest Thermostat in the list of accessories that appear.
11. If it doesn’t show up, tap My Accessory isn’t Shown Here and then tap Enter code.
12. Paste the code you copied into the Setup Code dialogue box that appears.
13. Tap Continue.
14. Choose a room to add the thermostat to.
15. Name the thermostat.

1. Open the Google Home app.
2. Tap Favorites or Devices
3. Select your thermostat.
4. Change the mode, tap Temperature mode and select the one you want.
5. Tap and drag the dial clockwise or counterclockwise to increase or decrease the temperature
6. Tap + or – to increase or decrease the temperature 1° at a time.

1. Firstly, use Wallet-enabled apps.
2. Scroll down in Wallet. Then edit "Passes" and tap Find Apps for Wallet.
3. Scan QR code or barcode.
4. When scrolling down in Wallet, tap on Edit Passes > Scan code and scan with iPhone camera.
5. Pay with Apple pay to a supported merchant and get a notification. Then tap the wallet notification.
6. Use messages or Mail and go through the web browser.
7. Share through AirDrop and use a Mac.
8. For car keys, use the app provided by the manufacturer of the car. Then add keys from email and use the information display of the car.

1. Follow the instructions in the email sent by the pass issuer.
2. There is an app at the pass issuer, then open the app.
3. After recieving a notification from the pass issuer and tap Add.

1. FaceTime Enhancement: Apple added Spatial Audio to FaceTime. Each participant's audio comes from their screen position. It removes background noise, and Portrait Mode blurs the speaker's background.
2. Apple Maps Feature: Augmented reality walking directions inspire from Google Maps. New additions include interactive globe and detailed city experiences.
3. New Camera Tricks: Added Live Text, Visual Lookup, and Zoom in QuickTake videos.
4. Better, Faster Siri: Improved on-device processing speed and privacy. Added on-device Siri personalization, offline support, and dictation.
5. A more Dramatic Weather: Shows current conditions via computer-generated graphics.
6. Spatial Audio Upgrades: Added dynamic head-tracking component to spatial upgrades.

1. Using Apple Home App: I use Apple HomeKit on my iPhone, iPad or Mac.
2. Using Siri Voice Commands: My personal favorite method to use Apple HomeKit is where Siri which works with iPhone, iPad, Apple Watch, HomePod, Mac or the Apple TV.

• Control lighting: I can now control my lighting using my Home and Siri.
• Automate Routines: I can easily create custom routines and automate tasks such as turning off lights and adjusting my thermostat.
• Secure Home: I can set up security systems with my HomeKit such as when doors or windows are opened or closed and receive notifications on my phone and Apple Watch.
• Control smart devices: I can control all my HomeKit compatible smart home devices from anywhere with my iPhone or iPad. Devices like thermostats, coffee makers, air purifiers, fans and more.
• Use Siri: I can control my HomeKit devices and connected devices using Siri voice commands with Siri integration.
• Manage heating and cooling: I can control my thermostats, set schedules and even monitor energy usage from my iPhone or iPad.
• Monitor Cameras: I can view live video feeds from my HomeKit-enabled cameras and receive notifications when motion is detected.

• 4K screen resolution.
• Thread networking support.
• Gigabit Ethernet.
• 128GB Storage.
• A15 Bionic chip.
• Siri Remote with USB-C connector.