How to Add Any Athom Devices to Apple HomeKit

How to Add Any Athom Devices to Apple HomeKit

Creating a Athom HomeKit is finally possible! Yes, you read that right. As a person who uses a lot of Athom devices I wanted to control them with my iPhone, the Home app. Finally, I have found a few good solutions that can create the Athom HomeKit integration I dreamed for.

These are the methods I used:

1. AddToHomeKit [Recommended Solution]  

2. ATH Bridge [Recommended Device Solution]  

3. HOOBS 

4. HomeBridge Solution  

AddToHomeKit [Recommended Solution]

AddtoHomeKit is a web application and a downloadable app that guides you to add any device to Apple HomeKit. I have personally used AddtoHomeKit to add many devices to HomeKit. Recently they also updated their services and will be offering installation support as well! What I liked about AddtoHomeKit is that it provides in-depth step by step guides that eases the whole process.

few-of-the-offered-integrations
Few of the Offered Integrations

ATH Bridge [Recommended Device Solution]

The ATH Bridge formally known as the Athom Bridge is an affordable and simple device solution to add your Athom Devices to Apple HomeKit. I used the ATH Bridge to add Nuki to HomeKit and UniFi to HomeKit. You only need to download the plugins and configure them and you are done!

Athom Homey Pro is another great device solution to add devices to HomeKit

A few things I liked about the ATH Bridge is that just like AddtoHomeKit, the ATH Bridge allows you to add any device to Apple HomeKit. Plus, it is affordable, open source and does not require coding.

HOOBS

HOOBS (HomeBridge Out of the Box) is a user-friendly compatible platform. It simply indicates setting up the process and operating HomeBridge. It is the most popular open-source software available so far. Additionally, it enables users to add any devices into Apple HomeKit.  

Fast convert any devices into HomeKit accessories.  

Enable to operate via the Apple Home app or with Siri voice commands facilitated.  

HomeBridge Solution

HomeBridge is an open-source software platform. It integrates non-HomeKit compatible devices into Apple HomeKit. If you’re a techy user, this is the best solution for you. This software acts as a Bridge between non-HomeKit devices and HomeKit. 

HomeBridge plugin for controlling your Athom Devices cast display using HomeKit or Siri.  

How to Add Any Athom Devices to Apple HomeKit

Athom devices don't directly connect to Apple HomeKit. Therefore, you can choose the ATH Bridge as an interconnection provider among them. Follow these steps to set up:

  1. Setting Up the Athom Bridge:
  2. Connect to Power: Make sure to properly connect to the power cable to power.


    Connect to Wi-Fi: It depends on your Bridge model and may automaically create a temporary Wi-Fi network. Connect your iPhone or iPad to this network.


    Additionally, you may need to access the Bridge's configuration webpage. The default address is typically http://192.168.4.1.


    Configure Wi-Fi: On the Bridge's configuration webpage or app, pick your home Wi-Fi network enter your password, and then tap to save settings.


  3. Link the Athom Bridge to Apple Home:
  4. Go to the Apple Home app on your iPhone or iPad.


    Tap the "+" icon to add an accessory.


    Then pick on of these options:


    Scan the QR Code: The app searches and detect nearby HomeKit accessories. May display an implication about adding an untrusted accessory. Confirm that you want to add the Bridge.


  5. Link Athom Devices

  6. After the Athom Bridge link to the home app, you can add Athom devices.

Troubleshooting Athom Devices with Apple HomeKit: Step-by-Step Guide 

If you're struggling to link Athom Devices to Apple HomeKit via the ATH Bridge, this guide might help you:

  1. Initial Checks
  2. Power and Connectivity:


    Check that the Athom Bridge is properly plugged in and powered on.


    Check Wi-Fi router connectivity and whether your smartphone or tablet is connected to the same network.


    Check the Bridge's Wi-Fi LED condition.


    Update the App to get the latest version before functioning. Make sure you have the latest versions of the Athom Bridge app and the Apple Home app.


  3. Device Compatibility:
  4. Double-check the compatibility of Athom devices with the Athom Bridge. check Zigbee technology enabling. (You can find compatibility lists on the Athom Bridge website).


  5. Restarting Devices:
  6. Power Cycle:


    Unplug the Wi-Fi router and  Athom Bridge for 30 seconds, then re-plugin, waiting for reboot to complete before powering on the next.


    Reset Bridge (if required).


  7. Bridge and Athom Device Transmission:
  8. Check Bridge current status:


    Go to the Athom Bridge app (if applicable) check the Bridge condition and identify any connected Athom devices.


  9. Apple HomeKit Issues: 
  10. Home Hub:


    Make sure you have a HomeKit hub set up accessories.


    HomeKit Settings:


    Go to the Home app and check current home settings availability and connection.


  11. Advanced Troubleshooting:
  12. Wi-Fi interference:


    Consider if other Wi-Fi devices or congested channels might be interfering with the Bridge's signal. Try changing the Wi-Fi channel on your router if possible. 


    Firewalls and Security Settings:


    Firewall settings on your router or else the network may be blocking communication between the Bridge and Apple servers. Consult the router's manual or internet service provider for more guidance.


    Still wondering how to Connect SmartThings to HomeKit using HomeBridge?  Then let's look at its simple way.

Connect Athom to HomeKit using HomeBridge 

You can easily control and monitor your Athom devices using HomeKit. HomeBridge acts as a bridge between HomeKit and Athom devices. You can install Apple HomeKit Athom HomeBridge assisting with this guidance. 

  1. Install the HomeBridge.
  2. Open and go to the “Plugins option”. 
  3. Search the Athom Plugin.
  4. Install the HomeBridge Athom Plugin.
  5. Provide plugin configuration.
  6. Restart HomeBridge. 

Now it's ready. 

Connect Athom to HomeKit using HOOBS

  1. Setup HomeBridge
    • Prepare Hardware
    • Obtain HOOBS Image
    • Setup Raspberry Pi
    • Access HOOBS Interface
    • Create Administrator Account
  2. Pair HOOBS Device to HomeKit
    • Locate QR Code
    • Open Apple Home App
    • Add Accessory
  3. Add Athom plugin to HOOBS
    • Access Plugin Installation
    • Search for Athom Plugin
    • Install Plugin
  4. Connect Your Athom Account to the Plugin
    • Access Plugin Settings
    • Select Server
    • Configure Athom Plugin
    • Link Account
    • Log in to Athom Account
    • Enter Authentication Code
    • Save Changes

Now it is successfully integrated and ready to go. Let's see what are the HomeKit devices that are compatible with Apple HomeKit.

Integrate Athom Devices with Home Assistant

Athom devices generally use standard protocols like Zigbee or Z-Wave. If the Athom device has Matter or Home Assistant compatibility, the integration would often involve adding it as a Zigbee or Z-Wave device in Home Assistant via an existing compatible hub such Zigbee2MQTT.

Integrate Athom Devices with Alexa

Athom may have a direct Alexa skill for integration which would be accurate if there is a verified Athom skill. If Athom supports Matter or another Alexa-compatible standard, it could allow integration without a dedicated skill.

Editor's Pick

My pick would definitely be AddtoHomeKit, not only is it easy to add any device to Apple HomeKit but it is also less time-consuming. I loved their installation support which just made the whole process easier. Athom Devices works with Apple HomeKit to provide customized-based functions. Provide users with the most reliable solutions such as AddtoHomeKit software solutions, and HOOBS.

FAQs


Yes, it is safe and secure. All external communication is encrypted with an end-to-end encryption security feature. Therefore, it guarantees all the data is safe with high security. 

Yes, you can add various smart home-compatible devices to HomeKit using Athom Bridge, including brands like Nest, Ring, Lifx, TP-Link, Ikea, Philips Hue, Sonos, Logitech, Arlo etc. All these devices branded are fully integrated with the Apple HomeKit hub. 

If the device has a button, then you can reset it by holding the button down for 40 seconds. If its unable then you can follow this method,

  • Remove device power for 30 seconds. 
  • Power on and off six times with intervals of less than 10 seconds and then leave the power on after the seventh cycle. 

This process allows for a factory reset Tasmota device. 

  • HomeKit Wi-Fi Mini Relay Switch, 16A
  • ZemiSmart Zigbee Hub, Works with Apple HomeKit and Tuya Smart Life
  • HomeKit Wi-Fi Smart Bulb, RGBWC, Bayonet B22 or Screw E27 Fitting
  • Athom HomeBridge HomeKit Server
  • HomeKit Wi-Fi Smart Plug, UK Style Plug/Socket, 16A
  • HomeKit Energy Monitoring Wi-Fi Smart Plug, EU Style Plug/Socket, 16A
  • HomeKit Presence Sensor
  • HomeKit Relay Switches
  • HomeKit Wall Switches